Posts Tagged 'mainsheet block'

harken red blocks

Harken is celebrating 50 years in business this year, and is offering a unique twist on their traditional 57mm blocks by adding a bit of color: bright red sheaves.

you can find them at various Harken dealers and of course at APS.

you can enter for a chance to win a 57mm carbo ratchet block from the Harken blockheads here.

the Harken 2135 is my go-to choice for a mainsheet block for a Sunfish, although I only have the old boring black versions…

Advertisements

harken h150

I was just browsing online for some new rigging to get for the Minifish that I bought in November, and came across a nice little video that Annapolis Performance Sailing just created that talks about the Harken H150 cam cleat and some of the accessories you can pair with the H150.

the H150 is a great little cam cleat that I have used before with my Sunfish if I want the option to cleat the mainsheet.  my setup includes a Harken carbo ratcheting block – the 57mm H2135 on a stand-up spring – that controls the tension on the mainsheet.  I mounted the H150 cam cleat on the turned down lip around the cockpit of the Sunfish.  the picture below is before I installed the stand-up spring, but shows the H150 mounted on the cockpit lip.

Img0187_072

this position is important for a few reasons: it keeps the cam cleat mostly out of the way, and it makes it fairly difficult to reach that far into the middle of the boat to cleat off the mainsheet when you are hiked out in a stiff breeze.  some sailors/racers like to install a cleat on each side of the cockpit near the outer edge of the Sunfish, but these can hurt your legs if you ever are hiked out and forward enough that they get in the way.

the reason to avoid cleating off your mainsheet in a medium to high strength winds is that you lose the ability to quickly spill the sails if you are hit with a quick puff of breeze.  it is recommended to learn to sail with the mainsheet always in your hand, controlling the sail and making minor adjustments with the wind.  if you were hit with a large gust of wind with the mainsheet cleated, it could cause you to flip your Sunfish and take an impromptu swim!

a note for newer Sunfish with the rolled gunwales – the cockpit trim makes it difficult to install the H150 on the cockpit lip.  you might be able to figure something out, but with my newer Sunfish, I just installed the H2135 and the standup spring, and skipped the cam cleat.  either option works!

Img0213_019 mainsheet block

HT: APS Stern Scoop blog


Enter your email address to subscribe to this blog and receive notifications of new posts by email.

Join 1,325 other followers

my2fish archives

my2fish stats

  • 472,919 hits
Sailing Blogs
Sailing Blogs - Blog Catalog Blog Directory